To Next PageTo Next PageWhat to do if shredding material is not drawn in Viking Lawn and Garden Equipment?
If the shredding material is not being drawn in, especially with the GE 260 model, the blade disc's rotational direction may be incorrect. Change the rotational direction of the blade disc.
What to do if my Viking GE 150 Lawn and Garden Equipment motor does not start?
If the motor doesn't start, it could be due to several reasons. First, ensure that the feed chute is properly closed, as the safety cut-off switch might be actuated. Second, the blade disc might be blocked. In this case, check the power cable and fuse. Finally, the locking device may not be reset; in this case, reset the locking device.
Why Viking Chipper motor does not start?
The motor may not start because the feed chute is not properly closed, activating the safety cut-off switch. Another potential cause is a blocked blade disc. Also, the locking device might not be reset. Reset the locking device or check the power cable and fuse. Allow machine to cool down.
What to do if Viking Chipper shredding performance is reduced?
If your Viking Chipper's shredding performance is reduced, the blades may be blunt. Reverse, re-sharpen, or replace the shredding blades.
Why is shredding material not drawn into my Viking Chipper?
If shredding material is not being drawn into your GE 260 Viking Chipper, the blade disc may have an incorrect rotational direction. Change the rotational direction of the blade disc.
Warnings and precautions regarding electrical hazards.
Checks and preparations required before using the machine.
Safe operating procedures and best practices during use.
Procedures and precautions for maintaining and repairing the machine.
Details on acceptable materials for shredding.
List of materials that should not be processed.
Specifications for the maximum size of branches that can be shredded.
Guidance on loading the machine to avoid overloading the motor.
Explanation of the overload protection system and its reset.
Procedure to follow if the shredding unit becomes blocked.
Instructions on how to safely feed material into the shredder.
Guidelines for connecting the machine to the electrical supply.
Steps for connecting the power cable to the machine.
Procedure for starting the garden shredder.
Steps for safely turning off the garden shredder.
Warnings and precautions regarding electrical hazards.
Checks and preparations required before using the machine.
Safe operating procedures and best practices during use.
Procedures and precautions for maintaining and repairing the machine.
Details on acceptable materials for shredding.
List of materials that should not be processed.
Specifications for the maximum size of branches that can be shredded.
Guidance on loading the machine to avoid overloading the motor.
Explanation of the overload protection system and its reset.
Procedure to follow if the shredding unit becomes blocked.
Instructions on how to safely feed material into the shredder.
Guidelines for connecting the machine to the electrical supply.
Steps for connecting the power cable to the machine.
Procedure for starting the garden shredder.
Steps for safely turning off the garden shredder.
General| Brand | Viking |
|---|---|
| Model | GE 150 |
| Category | Lawn and Garden Equipment |
| Language | English |
