To Next PageTo Next PageWhat to do if shredding material is not drawn in Viking Lawn and Garden Equipment?
If the shredding material is not being drawn in, especially with the GE 260 model, the blade disc's rotational direction may be incorrect. Change the rotational direction of the blade disc.
What to do if my Viking Lawn and Garden Equipment motor does not start?
If the motor doesn't start, it could be due to several reasons. First, ensure that the feed chute is properly closed, as the safety cut-off switch might be actuated. Second, the blade disc might be blocked. In this case, check the power cable and fuse. Finally, the locking device may not be reset; in this case, reset the locking device.
Why Viking Chipper motor does not start?
The motor may not start because the feed chute is not properly closed, activating the safety cut-off switch. Another potential cause is a blocked blade disc. Also, the locking device might not be reset. Reset the locking device or check the power cable and fuse. Allow machine to cool down.
What to do if Viking Chipper shredding performance is reduced?
If your Viking Chipper's shredding performance is reduced, the blades may be blunt. Reverse, re-sharpen, or replace the shredding blades.
Why is shredding material not drawn into my Viking Chipper?
If shredding material is not being drawn into your GE 260 Viking Chipper, the blade disc may have an incorrect rotational direction. Change the rotational direction of the blade disc.
Critical safety warnings regarding electrical hazards and precautions.
Checks and preparations required before starting the machine.
Procedures and safety rules for operating the machine.
Details on acceptable materials for shredding and processing.
Steps for blocked units and safe feeding procedures.
Explanation of the safety feature preventing unintended restart.
Description of the safety interlock for the feed chute.
Instructions and requirements for connecting the machine to the power supply.
Specific steps for connecting the power cable to the machine.
Procedure for starting the garden shredder and initial operation.
Instructions on how to safely switch off the garden shredder.
Detailed guide on the shredding process and setup.
Critical safety warnings regarding electrical hazards and precautions.
Checks and preparations required before starting the machine.
Procedures and safety rules for operating the machine.
Details on acceptable materials for shredding and processing.
Steps for blocked units and safe feeding procedures.
Explanation of the safety feature preventing unintended restart.
Description of the safety interlock for the feed chute.
Instructions and requirements for connecting the machine to the power supply.
Specific steps for connecting the power cable to the machine.
Procedure for starting the garden shredder and initial operation.
Instructions on how to safely switch off the garden shredder.
Detailed guide on the shredding process and setup.
General| Brand | Viking |
|---|---|
| Model | GE 250 |
| Category | Lawn and Garden Equipment |
| Language | English |
