8
Installation Instructions
Unpack the Refrigerator
Remove the Packaging
Dispose of/recycle all packaging materials. Do not use sharp instruments, rubbing alcohol, ammable
uids, or abrasive cleaners to remove tape or glue. These products can damage the surface of your
refrigerator.
IMPORTANT:
Use
•
3
⁄8” socket wrench to remove skids.
All four leveling legs must contact the floor to support and stabilize the full weight of the refrigerator.
•
Clean Before Using
After you remove all of the package materials, clean the inside of your refrigerator before using it. See
the cleaning instructions in the Use & Care Guide.
To Next Page
Loading...
