6
Installation Requirements
Location Requirements
NOTES:
The cabinet depth refrigerator can be installed into a recessed opening, at the end of cabinets or
•
as a freestanding refrigerator.
If you are installing the refrigerator to t ush with the front of the base cabinets, all shoe molding
•
and baseboards must be removed from the rear of the refrigerator opening.
Location should permit doors to open fully. See the “Door Swing Dimensions” section.
•
Do not install the refrigerator near an oven, radiator, or other heat source, nor in a location where •
the temperature will fall below 55°F (13°C).
Floor must support refrigerator weight (more than 600 lbs [272 kg], door panels and contents).
•
Electrical Requirements
Before you move your refrigerator into its nal location, it is important to make sure you have the
proper electrical connection.
To Next Page
Loading...
