Viking DFUD042 - Important Safety Instructions; General Safety Precautions

2
TOOLS YOU WILL NEED
1) Phillips No. 2 screwdriver
2) Flat blade screwdriver
3) Torx screwdriver size T 20
4) Adjustable wrenches
(if copper fittings are used)
5) Open ended wrenches
1/2” (1.3 cm) or 5/8” (1.6 cm)
6) Wire cutters and strippers
7) Tape measure
8) Level
9) Electric Drill
10)1” drill bit or hole saw
MATERIALS YOU WILL NEED
FOR INSTALLATION:
-Min. 3/8” (.95 cm) OD copper tubing of sufficient length for your installation
-Shut-off valve and fittings for water supply line
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)