To Next PageTo Next Page
Need help?Do you have a question about the Viking FDWU324 and is the answer not in the manual?
General| Style | built in |
|---|---|
| Color | panel ready |
| Load Capacity | 14 place settings |
| Number of Cycles | 8 |
| Drying Type | heated |
| Noise level | 45 db |
| Control Type | touchpad |
| Delay Start | yes |
| Water Filter | yes |
| Leak Protection | no |
| Water Softener | no |
| Food Disposer | no |
| Sanitize Settings | yes |
| Half Load | yes |
| Wi-Fi | no |
| Smart Home | no |
| Remote Control | no |
| Voltage | 120 volts |
| Frequency | 60hz |
| Current | 15amps |
Weight and Dimensions| Depth | 24 inch |
|---|---|
| Height | 33 7/8 inch |
| Width | 23 9/16 inch |
| Net Weight | 97 lbs |
Crucial instructions to follow before commencing any repair work.
Guidance on safety alerts, symbols, and their associated hazard meanings.
Explanation of the nomenclature used in model numbers for identification.
Details regarding the structure and interpretation of product serial numbers.
An overview of the control panel's design, buttons, and their functions.
Explanation of the various icons and indicators shown on the dishwasher's digital display.
Detailed sequence of operations, conditions, and timings for the AUTO wash cycle.
Detailed sequence of operations, conditions, and timings for the COMBI CLEAN wash cycle.
Detailed sequence of operations, conditions, and timings for the POTS & PANS+ wash cycle.
Detailed sequence of operations, conditions, and timings for the REGULAR WASH cycle.
Detailed sequence of operations, conditions, and timings for the GLASS CARE wash cycle.
Detailed sequence of operations, conditions, and timings for the HOUR WASH cycle.
Detailed sequence of operations, conditions, and timings for the QUICK WASH cycle.
Detailed sequence of operations, conditions, and timings for the RINSE & HOLD cycle.
A table presenting estimated wash durations for various programs and selected options.
Details on adjustable settings such as interior light, sound level, and rinse aid dosage.
Step-by-step guide on how to access the dishwasher's service menu.
Comprehensive explanation of the SFt service functional test program.
Configuration options for the interior light and the micro-filter function.
Information on setting the automatic door opening feature at the end of a cycle.
Details on how to configure the automatic tablet detection feature.
Guidance on adjusting the audible notification sound levels.
Setting the regeneration frequency for water softener equipped models.
Adjusting the amount of rinse aid dispensed during the wash cycle.
Information regarding the ionizer function, noting its unavailability on Viking models.
Details on the liquid detergent dosage feature, noting its unavailability on Viking models.
Step-by-step instructions for entering the service menu using control panel inputs.
Overview and explanation of factory test modes (HFE, IFt) and the SFt service test.
Procedure for executing the automated service test for diagnostic purposes.
A comprehensive list and explanation of fault codes applicable to Viking dishwasher units.
Instructions for performing an Eprom reset to restore factory default settings.
Method to view the software versions of the main, display, and button boards.
General guidelines for diagnosing and resolving electronic control faults and errors.
Identifying the causes and troubleshooting steps for the E:01 overflow error.
Troubleshooting the E:02 error related to the absence of water inflow.
Diagnosing the E:03 error pertaining to issues with the heating element.
Troubleshooting the E:04 error associated with the turbidity sensor.
Diagnosing the E:05 error related to the water diverter valve's position.
Troubleshooting the E:06 error concerning the NTC temperature sensor.
Diagnosing the E:07 error related to the water inlet valve's operation.
Troubleshooting communication loss between the main and external electronic boards (E:08).
Troubleshooting communication loss between the main and display electronic boards (E:09).
Troubleshooting communication loss between the main and user interface boards (E:10).
Diagnosing conductor probe or short circuit issues (E:11, E:12).
Troubleshooting the E:13 error related to the pressure switch functionality.
Troubleshooting the E:15 error when the water counter fails to register water.
Diagnosing the E:16 error indicating a blocked drain pump.
Troubleshooting the E:17 error related to the auto detergent motor's positioning.
Schematic illustrating the wiring and connections of the appliance's control panel.
A guide to identifying electrical components and color codes used in wiring diagrams.
Detailed wiring diagram of the main control board, including power and component connections.
