Page 34 of 41 December 12, 2018
Troubleshooting
Main Board Communication Fault E:08
During the normal machine working cycle, if communication between main electronic board and external electronic board is lost; this
fault is encountered.
Possible reasons:
• Cable harness errors
• Faulty socket installation
• Faulty electronics
• Main electronic board
• Display electronic board
Display Board Communication Fault E:09
During the normal machine working cycle, if communication between main electronic board and display electronic board is lost; this
fault is encountered.
Possible reasons:
• Cable harness errors
• Faulty socket installation
• Faulty electronics
• Main electronic board
• Display electronic board
To Next Page
Loading...
