Page 25 of 41December 12, 2018
Service Procedures
This is an automated test used in the factory at the end of line, skip this test by pressing and
releasing the Time delay + pad to advance to the next item.
The display will change to IFt as shown below, this is another factory only test, skip it by
pressing and releasing the Time delay + pad to advance to the next item.
The display advances to “SFt” which is a service functional test program used in
the eld by service technicians, see display below.
Ensure the soap dispenser door is closed, open the dishwasher door and shut the soap dispenser door before proceeding. Failure to
shut the door will cause a fault during the upcoming test.
To Next Page
Loading...
