What to do if the "Check Water" light is flashing on my Viking FGIM515?
If the "Check Water" light is flashing blue on your Viking Ice Maker, it indicates a water supply issue. Ensure that the water supply is restored. The ice maker checks for water every 20 minutes and will automatically restart ice production once the water supply is replenished.
What does it mean when the “Time to Clean” light is on in my Viking FGIM515?
When the “Time to Clean” light is illuminated on your Viking Ice Maker, it signifies that it is time to clean the ice making system.
Requirements for Ground Fault Interrupter (GFI) usage and specifications.
Basic precautions to reduce risk of fire, electric shock, or injury.
Guidelines for locating the ice machine for optimal air circulation and accessibility.
Safety measures to prevent child entrapment in old refrigeration units.
Guidance on contacting waste disposal authorities for proper appliance disposal.
Detailed measurements for the ice machine with a professional door panel.
Specifications for the door's opening range and clearance requirements.
Detailed measurements for the ice machine with a custom door panel.
Specifications for the door's opening range and clearance requirements.
Technical data for the 15"W. Undercounter/Freestanding Ice Machine.
Required dimensions for the installation opening for the ice machine.
Diagram showing the location of drain and potable water inlet connections.
Indicates the position of the 115V power cord.
Explains how air flow affects ice production and where air is taken in and expelled.
Recommendations for water filters and treatment methods for optimal ice making.
Guidelines for using Reverse Osmosis water, including conductivity limits.
Essential connections and airflow requirements for the ice machine.
List of components supplied with the ice machine for installation.
Instructions for attaching an accessory door panel to the ice machine.
Steps and guidelines for creating and attaching a custom door panel.
Detailed instructions and measurements for cutting and preparing a custom door panel.
Guidance on how to mount the custom panel to the ice machine door.
Visual guide illustrating the attachment of the accessory door panel.
Steps for installing hole plugs and hinge covers for a finished look.
Step-by-step instructions for changing the door swing direction.
How to install the door stop to prevent damage to adjacent cabinets.
Instructions for attaching hinge covers and handling the kickplate.
Specific notes for built-in situations, slab installations, and corner placements.
Recommended water supply tubing types and shut-off valve installation.
Instructions for connecting the drain tube for drain pump models.
Note on local code requirements for an air gap between the drain tube and receptacle.
Instructions for setting up the gravity drain system, including tubing and connections.
Guidance on routing the drain tube through the base pan or back panel.
Critical warnings regarding electrical shock hazards and proper connection.
Steps for plugging in the unit, positioning, and initial operation checks.
A checklist to ensure all installation steps have been completed correctly.
How to contact dealers or authorized agencies for service.
Instructions for recording essential unit information for service requests.
To Next Page
General
