What to do if my Viking Huskylock S15 stitches skip?
If your Viking Sewing Machine is skipping stitches, try the following: Insert a new needle, as the current one may be bent or blunt. Ensure the needle set screw is tightened. Verify the needle is correctly inserted. Try changing the type or size of the needle. Check the threading of your machine. Increase the presser foot pressure. Also, consider using a high-quality thread.
What to do if Viking Sewing Machine makes irregular stitches?
If you're experiencing irregular stitches with your Viking Sewing Machine, try balancing the thread tension. Check for any tangled or caught thread. Also, double-check the threading to ensure it is correct.
Why does the thread keep breaking on my Viking Huskylock S15 Sewing Machine?
If the thread breaks while using your Viking Sewing Machine, try these steps: First, check the threading to ensure it's correct. Next, inspect for any tangled or caught thread. Ensure the needle is correctly inserted. Replace the needle with a new one, as the current needle might be bent or have a blunt point. Use high-quality thread and try loosening the thread tension.
Why is the needle breaking on my Viking Huskylock S15 Sewing Machine?
If the needle breaks while using your Viking Sewing Machine, make sure you insert the needle correctly. Avoid pulling the fabric as you sew. Tighten the needle set screw. If you're working with heavy fabrics, switch to a larger size needle.
How to improve fabric feed on a Viking Huskylock S15 Sewing Machine?
If the fabric does not feed well through your Viking Sewing Machine, try lengthening the stitch length. For heavy weight fabrics, increase the presser foot pressure. For light weight fabrics, decrease the presser foot pressure. Check the differential feed.
What to do if Viking Huskylock S15 fabric jams?
If your Viking Sewing Machine's fabric jams, be sure the cutters are in the sewing position. Check for any tangled or caught thread. If you're working with thick layers of fabric, compress them with a conventional machine before using the overlock.
How to stop fabric puckering with my Viking Huskylock S15?
If the fabric puckers when using your Viking Sewing Machine, try loosening the thread tension. Also, check for any tangled or caught thread. Consider using a high-quality, lightweight thread. Shorten the stitch length. Decrease the presser foot pressure, especially for lightweight fabrics. Check the differential feed.
How to fix irregular trimming on Viking Sewing Machine?
To address irregular trimming on your Viking Sewing Machine, check the alignment of the cutters. If necessary, replace one or both cutters.
General| Type | Overlock |
|---|---|
| Speed | Up to 1200 stitches per minute |
| Differential Feed | Yes |
| Adjustable Differential Feed | Yes |
| Needles | 2 |
| Threading | Color-coded |
| Adjustable Presser Foot Pressure | Yes |
| Built-in Stitch Finger | Yes |
| Free Arm | Yes |
| Stitch Options | flatlock |
| Stitch Width | Up to 7mm |
| Stitch Length | 1.0 - 4.0 mm |
| Number of Threads | 4/3/2 |
Critical warnings about electrical hazards and prevention measures.
Important safety precautions to prevent physical harm and accidents.
Instruction to retain vital safety information for future reference.
To Next Page
