0478 131 9920 C - EN
74
2.1 General
This instruction manual constitutes
original manufacturer’s instructions in
the sense of EC Directive 2006/42/EC.
VIKING is continually striving to further
develop its range of products; we therefore
reserve the right to make alterations to the
form, technical specifications and
equipment level of our standard
equipment.
For this reason, the information and
illustrations in this manual are subject to
alterations.
This instruction manual is protected by
copyright. All rights reserved, especially
the right of reproduction, translation and
processing using electronic systems.
2.2 Country-specific versions
VIKING supplies machines with different
plugs and switches, depending on the
country of sale.
Machines with European plugs are shown
in the illustrations. Machines with other
types of plug are connected to the mains in
a similar way.
2.3 Instructions for reading the
instruction manual
Illustrations and texts describe specific
operating steps.
All symbols which are affixed to the
machine are explained in this instruction
manual.
Planning routing of the perimeter
wire 108
Making a sketch of the mowing
area 108
iRuler 109
Confined areas 110
Routing the perimeter wire 110
Connecting the perimeter wire 110
Installing linking sections 111
Installing no-go areas 111
Secondary areas 112
Corridors 112
Installing reserve wire 113
Using wire connectors 113
Docking station 114
Docking station controls 114
Notes on mowing 115
General 115
Mulching 115
Active times 115
Mowing duration 115
Manual mowing 115
Operating the machine 115
Preparation 115
Removing and installing the control
panel 116
Adapting the programming 116
Automatic mowing 117
Mowing independently of active
times 117
Manual mowing 117
Docking the robotic mower 118
Charging the battery 118
Maintenance 119
Maintenance schedule 119
Cleaning the machine 119
Checking the mowing blade wear
limits 120
Removing and installing the
mowing blade 120
Sharpening the mowing blade 121
Finding wire break 121
Power supply unit plug 122
Storage and winter break 122
Standard spare parts 123
Accessories 123
Minimising wear and preventing
damage 124
Environmental protection 124
Removing the battery 124
Transport 125
Lifting or carrying the machine 125
Securing the machine (lashing) 125
CE - manufacturer's declaration of
conformity 125
Technical specifications 126
Messages 127
Troubleshooting 131
Service schedule 134
Handover confirmation 134
Service confirmation 134
Installation examples 135
2. Notes on the instruction
manual
To Next Page
