EasyManua.ls Logo

Viking MI 632 - Long-Term Storage and Winter Break; Disposal Procedures; Description of Symbols

Viking MI 632
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
87
DEFRNLIT EN
0478 131 9920 C - EN
Only perform work on the cutting unit when
wearing thick work gloves and exercising
extreme care.
Ensure that all screws and nuts, especially
all screws and fastening elements of the
cutting unit, are securely tightened, so that
the machine is in a safe operating
condition.
Check the entire machine for wear or
damage on a regular basis, particularly
before extended periods when the
machine is not in use (e.g. over winter).
For safety reasons, worn or damaged
parts must be replaced immediately to
ensure that the machine is always in a safe
operating condition.
Components or guards that are removed
for maintenance operations must be
properly reinstalled immediately.
6.10 Storage for prolonged periods
without operation
Set the highest safety level before putting
into storage. (Ö 10.15)
In addition, activate the disabling device.
Ensure that the machine is protected from
unauthorised use (e.g. by children).
Store the machine in good operational
condition.
Thoroughly clean the machine before
storage (e.g. winter break).
Allow the machine to cool for approx. 5
minutes before storing it in an enclosed
space.
The storage room must be dry, frost-free
and lockable.
Never store the machine close to naked
flames or powerful heat sources
(e.g. oven).
During prolonged periods without
operation (e.g. winter break), remove the
docking station and store safely together
with the robotic mower. (Ö 15.8)
6.11 Disposal
Waste products can be harmful to people,
animals and the environment. They must
consequently be disposed of properly.
Consult your recycling centre or your
specialist dealer for information on the
proper disposal of waste products. VIKING
recommends VIKING specialist dealers.
Ensure that old machines are properly
disposed of. Render the machine
unusable prior to disposal. In particular,
remove the power cable of the power
supply unit, as well as the battery and
control panel of the robotic mower in order
to prevent accidents.
Risk of injury due to the mowing blade!
Always store an old lawn mower in a safe
place prior to scrapping. Ensure that the
machine and particularly the mowing blade
are kept out of the reach of children.
The battery must be disposed of
separately from the machine. Ensure that
batteries are disposed of safely and in an
environmentally friendly manner.
Warning:
Read the instruction manual before initial
use.
Warning:
Keep a safe distance from the machine
during operation.
Keep other persons out of the danger
area.
Warning:
Disable the machine before lifting it and
before working on it.
Warning:
Do not climb onto or sit on the machine.
Warning:
Never touch the rotating blade.
7. Description of symbols

Table of Contents