6
4. Remove cabinet side trim that is mounted on the left hand side of the unit that is to be installed on the right side of
the installation. Replace this side trim with the “Z” shaped side trim and shim included in the full length grille kit.
LLeefftt HHaanndd
CCaabbiinneett SSiiddee TTrriimm
PPoowweerr
SSwwiittcchh
SShhoowwrroooomm
SSwwiittcchh
3. Verify operation by plugging in
power cord. Power switch will
be shipped in the ON position
and showroom switch will be in
the ON position. (If showroom
switch is switched to the “OFF”
position, showroom mode is
engaged and power is shut off to
the compressor. This mode is for
showroom display only.)
To Next Page
