To Next PageTo Next PageWhat to do if my Viking RVGR3305B Ranges shows 3 flashes every 4 seconds?
If your Viking Ranges shows 3 flashes every 4 seconds, this indicates an ignition lockout. You should check the gas flow, spark leads, the position of the electrode, and the gas solenoid.
Why is the LED on continuously on my Viking RVGR3305B Ranges?
If your Viking Ranges displays the LED on continuously, it indicates a control fault. Try cycling the power and retrying. If the fault persists, the DSI may need replacement.
What does it mean when my Viking RVGR3305B Ranges flashes 4 times every 4 seconds?
If your Viking Ranges shows 4 flashes every 4 seconds, this indicates a gas solenoid fault. Check the wiring and the gas solenoid.
What does it mean when my Viking RVGR3305B Ranges flashes 6 times every 4 seconds?
If your Viking Ranges shows 6 flashes every 4 seconds, this indicates a gas solenoid fault. Check the wiring and the gas solenoid.
What does it mean when my Viking RVGR3305B flashes 8 times every 4 seconds?
If your Viking Ranges shows 8 flashes every 4 seconds, this indicates a gas solenoid fault. Check the wiring and the gas solenoid.
What does it mean when my Viking Ranges flashes 5 times every 4 seconds?
If your Viking Ranges shows 5 flashes every 4 seconds, this indicates a control fault. Try cycling the power and retrying. If the fault remains, the DSI may need replacement.
What does it mean when my Viking RVGR3305B flashes 2 times every 4 seconds?
If your Viking Ranges shows 2 flashes every 4 seconds, it indicates a control fault. Try cycling the power and retrying. If the fault persists, consider replacing the DSI.
How to troubleshoot no LED display on Viking RVGR3305B Ranges?
If your Viking Ranges shows no LED display, you should check the wiring.
What to do if my Viking RVGR3305B flashes 7 times every 4 seconds?
If your Viking Ranges shows 7 flashes every 4 seconds, switch the channel off and retry.
Discusses safety precautions, hazard symbols, and definitions of DANGER, WARNING, and CAUTION.
Explains how to locate and interpret the appliance's serial number.
Details the components and meaning of the appliance's model number.
Identifies and lists the various features and components of the gas range.
Provides critical safety guidelines to avoid fire and smoke hazards during operation.
Outlines immediate actions to take in the event of a fire related to the appliance.
Warns about hot surfaces and elements, advising caution during and after use.
Details safe practices for cleaning the appliance, including cooling down parts.
Provides instructions and warnings related to the self-cleaning cycle of the oven.
Covers California Proposition 65 warnings regarding potential exposures during self-cleaning.
Advises on the risks to pet birds from oven fumes released during self-cleaning.
Offers general advice and cautions about using the appliance, like avoiding use as a heater.
Instructions for initial cleaning and preparation before the first use of the range.
Details oven modes, features, and initial setup for optimal performance.
Explains how to interpret LED fault codes displayed on the DSI board.
Illustrates the wiring connections for the Direct Spark Module (DSI) board.
Lists LED error codes displayed on the control panel and their meanings.
Shows the connections and layout of the self-cleaning oven control board.
Provides operating voltage, resistance, and test locations for various range components.
Details heating cycles, timing, and cooling fan operation for different modes.
Step-by-step guide for testing the oven's bake operation and associated components.
Procedure for testing the oven's broil function and checking related components.
Explains the cycle of the broil burner and convection fan during convection broil mode.
Guide to testing the bake and broil solenoid valves for proper function.
Overview and testing instructions for the door lock assembly and motor.
Details how to test the continuity of the door lock latch switches.
Explains how to test the door lock switches in different positions.
Information on diagnosing the RTD and its resistance values at different temperatures.
Procedure for testing the spark module and igniter system.
Troubleshooting steps for surface burner igniters that fail to spark.
A general guide to diagnose common oven component issues and their solutions.
Covers troubleshooting specific to the surface burner components of the range.
Details the location and use of the quick power disconnect for servicing.
Provides resistance values for selector and thermostat positions.
Step-by-step guide for removing the oven door assembly from the range.
Instructions for removing the oven door gasket from the door liner.
Procedure for removing the outer panel of the oven door.
Steps to remove the oven door handle from the outer door panel.
Guide for safely removing the inner glass panel from the oven door.
Procedure for removing the oven door hinges.
Steps to remove the igniter for the bake burner.
Instructions for removing the bake burner assembly.
Guide for removing the broil burner and its associated igniter.
Steps for removing the orifice from the bake or broil burner manifold.
Procedure for removing the convection fan motor and assembly.
Instructions on how to access the main control components of the range.
Guide for removing the oven function selector knob and switch.
Steps to remove the oven light switch from the control panel.
Procedure for removing the oven thermostat from the control panel.
Instructions for removing the indicator light from the control panel.
Details the location and access for the DSI module and control board.
Steps to remove the DSI module from its mounting tray.
Procedure for removing the oven door switch.
Instructions for removing the high limit safety switch.
Steps to remove the main oven control board.
Procedure for removing the oven door lock assembly.
Steps for removing the gas valve for the surface burners.
Instructions on how to remove the range's backguard.
Procedure for removing the oven rack supports.
Steps to safely remove and replace the oven light bulb.
Instructions for removing the orifice from the jet holder.
Procedure for removing the main top surface of the range.
Steps to remove the jet holder from the gas line.
Instructions for removing the side trim and side panel of the range.
Procedure for removing the rear back panel of the appliance.
Steps to remove the side light housing from the oven liner.
Instructions for removing the oven door hinge receiver.
Steps for removing the gas solenoid valves.
Procedure for removing the gas pressure regulator.
Guide for removing and replacing the oven temperature sensor (RTD).
Steps to remove the cooling blower motor.
A detailed electrical wiring diagram for the RVGR3305B gas range.
General
