To Next PageTo Next Page
Need help?Do you have a question about the Viking RDSCD230-5B and is the answer not in the manual?
Core safety instructions and warnings for appliance operation.
Guidelines to prevent fire and smoke damage during appliance use.
Specific steps to take in case of a fire involving the appliance.
Further details and warnings for operating the self-cleaning cycle, including ventilation.
Diagram identifying connectors and terminals on the oven control board.
Table detailing test points, expected voltage, and resistance for control board components.
Steps to test the spark module for surface burner igniter function.
Specific test procedure for the spark module used with stack burner valves.
Procedure for diagnosing the line break relay and control board functionality.
Procedures to test the door lock motor and its associated microswitches.
Procedure to test the RTD sensor resistance and its characteristics.
Steps to measure resistance of the inner and outer bake elements.
Procedures to test continuity of the inner and outer bake element relays.
Voltage tests to confirm convection fan control board functionality.
Steps to measure resistance of the inner and outer broil elements.
Troubleshooting common issues like no power, bake, broil, or oven lights.
Troubleshooting problems related to convection bake, roast, or broil functions.
Troubleshooting steps for bake or broil elements not operating sufficiently.
Interpretation of error codes displayed via cycle and clean indicator lights.
Core safety instructions and warnings for appliance operation.
Guidelines to prevent fire and smoke damage during appliance use.
Specific steps to take in case of a fire involving the appliance.
Further details and warnings for operating the self-cleaning cycle, including ventilation.
Diagram identifying connectors and terminals on the oven control board.
Table detailing test points, expected voltage, and resistance for control board components.
Steps to test the spark module for surface burner igniter function.
Specific test procedure for the spark module used with stack burner valves.
Procedure for diagnosing the line break relay and control board functionality.
Procedures to test the door lock motor and its associated microswitches.
Procedure to test the RTD sensor resistance and its characteristics.
Steps to measure resistance of the inner and outer bake elements.
Procedures to test continuity of the inner and outer bake element relays.
Voltage tests to confirm convection fan control board functionality.
Steps to measure resistance of the inner and outer broil elements.
Troubleshooting common issues like no power, bake, broil, or oven lights.
Troubleshooting problems related to convection bake, roast, or broil functions.
Troubleshooting steps for bake or broil elements not operating sufficiently.
Interpretation of error codes displayed via cycle and clean indicator lights.
General
