BLADDER TANK MODEL VFT & FT
INSTALLATION, OPERATION AND
MAINTENANCE MANUAL
(
foam concentrate inside the bladder
)
TECHNICAL
MANUAL
F_032216 16.1 | TM1.3.1.1/14032016/en
The Viking Corporation, 210 N Industrial Park Drive, Hastings MI 49058
Telephone: 269-945-9501 Technical Services: 877-384-5464 Fax: 269-818-1680 Email: techsvcs@vikingcorp.com
VISIT THE VIKING WEBSITE FOR THE LATEST EDITION OF THIS TECHNICAL MANUAL
Page 3 of 35
THIS DOCUMENT PROVIDES IMPORTANT SAFETY INSTRUCTIONS
The user is strongly recommended to read and to follow carefully the instructions contained in this manual to prevent damage to
people and objects.
This document must be kept in a safe place together with all the technical documentation relevant to the materials purchased
(certicates, test report, etc...)
All the information contained in this manual is relevant to the description and operation of the whole equipment. For more details
regarding the sub-components, please make reference to the relevant manufacturer’s documentation.
DISCLAIMER
Viking declines any responsibility due to non-observance of these instructions, improper use of the equipment or use outside its
design limitation.
The compliance, partial or full, with the prescriptions and the information contained in this manual does not relieve anyone who
is in charge to install, to operate or to maintain in full efciency the bladder tank from the responsibility due to improper actions or
inexperience.
Viking is not responsible for the damage and any other consequence caused by a lack of skill of the personnel involved with the
with
bladder tank’s operation.
It is the sole purpose of this document to provide operating personnel with a basic understanding of the equipment and of its
components. In order to maintain the bladder tank and its accessories at a high level of efciency, all operators and maintenance
crew are urged to carefully read this instruction manual and keep it readily available for future reference.
This manual does not provide instructions on the procedures for installation, operation and maintenance that are specically in
place at the installation site. In addition, this manual does not provide instructions on the procedures, installation, operation and
maintenance of the re protection system the bladder tank is part of.
The user must be informed on the local regulations and laws and get in contact with the local authorities to obtain all required
permissions and approvals for operation within the installation plant.
In case any of the instructions provided in this manual are not completely understood by anybody involved in the installation,
operation and maintenance of the bladder tank manufactured by Viking, this must be reported to Viking before making any further
actions.
NOTICE
To Next Page
Loading...