Viking VGIC5301 - Replacing Oven Lights

19
Product Care
Replacing Oven Lights
DO NOT touch bulb with bare hands. Clean off any signs of oil from the bulb and handle with a soft cloth.
WARNING
ELECTRICAL SHOCK HAZARD
Disconnect the electric power at the main fuse or circuit
breaker before replacing bulb.
WARNING
DO NOT touch bulb with bare hands. Clean off any signs of oil from
the bulb and handle with a soft cloth.
1. Unsnap glass light cover using a screwdriver in the
access groove.
2. Firmly grasp light bulb and pull out.
3. Replace with halogen bulb using volt and wattage
requirements listed on glass cover.
4. Replace the light cover by snapping glass cover onto
metal box.
5. Reconnect power at the main fuse or circuit breaker.
access
groove
light
bulb
glass light
cover