4 Installation requirements
Notice!
The power and water supplies must be switched off before installation.
•
Make sure that installation has completely finished before connecting the ViClean to the power and water
supplies.
•
Make sure that the connection parts of the water supply hose are not damaged.
•
Use the ViClean solely in a line pressure range between 0.1 MPa (dynamic) and 1.0 MPa (static), see "Technical
data", Page 17.
•
Use the ViClean solely in a water temperature range between 10 °C and 35 °C, see "Technical data", Page 17.
•
The ambient temperature must be between 15 °C and 40 °C, see "Technical data", Page 17.
•
At a water hardness of N 2.4 mmol/l (N 14°dH), we recommend the use of a central water softening system to
ensure a long service life. You can find out the water hardness from your local water supplier.
•
There can be a small quantity of water still inside the product due to the water flow test carried out in the factory.
This water does not, however, constitute a product defect.
Notice!
These instructions describe the installation of ViClean with ViConnect. If you intend to
use an installation system from another manufacturer, read the respective instructions.
Installation dimensions, see "installation requirements", Page 20.
18
M.VILLEROY-BOCH.COM // V 2.0 // 04.03.2024 // 37524
To Next Page
Loading...
Need help?
General
