BLUETOOTH CONNECTION
1. Hold the button for 3 seconds to enable Bluetooth,
the logo LED will blink blue.
2. Enable Bluetooth on your device and search for your
Villo speaker.
3. Find and select the Villo speaker in your device list.
When connected, the logo LED will turn solid blue.
• To reset the Bluetooth connection, hold the button
for 3 seconds while in Bluetooth mode.
WI-FI CONNECTION
• To toggle between Bluetooth and Wi-Fi, hold the
button for 3 seconds.
• The Logo LED will turn white to indicate that Wi-Fi
mode is on.
From the dashboard, swipe left to navigate to additional screens
to see what’s playing, edit your favorites, and access streaming
services and or music stored on your device.
Streaming Music Services
Your Villo speaker supports TuneIn, iHeartRadio, Spotify, Tidal
and other third party streaming platforms. If you already have
accounts with any of these services, you can sign in through the
Villo app to access any songs or stations you may already have
saved with that service.
If you do not have an account with one of these services, the app
will guide you through the setup process, however, you may need
to download and install the internet music services first before it
can be played. Follow the on screen prompts to add services and
setup an account. Follow the on screen prompts to add services
and setup an account.
MORE APP CONTROLS
To Next Page
Loading...