Vimar 01910 Instruction Handbook

32 - ENGLISH
•Switch-off
- Press the
button; the display will show the OFF symbol
blinking alongside the temperature.
- Press the
button to confirm.
To switch the timer-thermostat back on, press the
button.
•Timedswitch-off
- Press the
button; the display will show the OFF symbol
blinking alongside the temperature.
- Press the
button again; the display will show two blinking
digits indicating the number of hours (h) to set.
- Using the
button, select the desired number of hours (from 1 to
99) and then press the
button to confirm.
The timer-thermostat will then stay off for the set period of time after
which it will switch on going into the prior operating mode (manual
or automatic).
•Antifreeze
- Press the
button; the display will show the OFF symbol
blinking alongside the temperature.
- Press the
button again; the display will show two blinking
digits to set if you want timed switch-off for the device.
- Press the
button a third time; the display will show 3 blinking
digits indicating the antifreeze temperature to set (from 04.0 °C to
15 °C).
- Using the
button, select the desired temperature and then
press the
button to confirm.
With the heating system off, the display will show the antifreeze
symbol next to the measured temperature.

Vimar 01910 Specifications

General

Brand	Vimar
Model	01910
Category	Thermostat
Language	English