Vimar radioclima User Manual

ITALIANO Manuale istruzioni 01930 - Base radio bidirezionale per cronotermostato.
01933 - Attuatore in radiofrequenza bidirezionale a 1 canale.
01934 - Attuatore in radiofrequenza bidirezionale a 4 canali.
ENGLISH Instruction manual 01930 - Radio transceiver base station for time-programmable thermostat.
01933 - Single channel two-way radiofrequency actuator.
01934 - Four-channel two-way radiofrequency actuator.
FRANÇAIS Mode d’emploi 01930 - Base radio bidirectionnelle pour chronothermostat.
01933 - Actuateur en radiofréquence bidirectionnel à 1 canal.
01934 - Actuateur en radiofréquence bidirectionnel à 4 canaux.
DEUTSCH Bedienungsanleitung 01930 - Zweiweg-Funkeinheit für Chronothermostate.
01933 - Zweiweg-Zuschalter über Funkfrequenz mit 1 Kanal.
01934 - Zweiweg-Zuschalter über Funkfrequenz mit 4 Kanälen.
ESPAÑOL Manual de Instrucciones 01930 - Base de Radio Bidireccional para cronotermostato.
01933 - Actuador por radiofrecuencia bidireccional de 1 canal.
01934 - Actuador por radiofrecuencia bidireccional de 4 canales.
ΕΛΛΗΝΙΚΑ Εγχειρίδιοοδηγιών 01930-Αμφίδρομηβάσηραδιοσυχνοτήτωνγιαχρονοθερμοστάτη.
 01933-Eκκινητήςαμφίδρομοςε�ικοινωνίαςραδιοσυχνοτήτωνμε1κανάλι.
  01934-Eκκινητήςαμφίδρομοςε�ικοινωνίαςραδιοσυχνοτήτωνμε4κανάλια.
RADIOCLIMA

Vimar radioclima Specifications

General

Brand	Vimar
Model	radioclima
Category	Thermostat
Language	English

Summary

3. INSTALLATION

3.1 Radio Transceiver Base Station

Details on wall-mounting the Radio Transceiver Base Station at a suitable height and distance from other components.

3.2 Radio relay actuator

Information on installing the radio relay actuator for EN 50022 rail mount, occupying six modules.

4. ADDITIONAL THERMOSTAT FUNCTIONS

4.1 Reset radio transceiver base station Menu

Procedure to restore the Radio Base Station to its original default configuration using the reset menu.

4.2 Installation Menu

Function for associating or excluding radio devices from the system using the installation menu.

4.3 Thermostat Manager Menu

Menu for programming or excluding secondary thermostats, managing their configuration.

5. SYSTEM CHARACTERISTICS

5.1 Low battery warning.

Signals for low battery status on the radio base station, requiring prompt replacement.

5.2 Replacing discharged batteries

5.3 Transmission fault indication

5.4 Error messages

6. DEVICE CONFIGURATION

6.1 Autolearn of devices on primary thermostat (step 1)

Sets up communication between primary thermostat and radio relay actuator or Internal Communication Interface.

6.2 Duplication of primary thermostat to secondary ones (step 2)

Copies radio system configuration data from a primary thermostat to secondary thermostats (up to 7).

6.3 Associating a secondary thermostat with a relay radio actuator (step 3)

Assigns a relay actuator channel to a thermostat previously autolearned by the system.

6.4 Disassociating a secondary thermostat from a radio relay actuator.

7. ELIMINATION OF DEVICES

7.1 Eliminating a radio relay actuator

7.3 Eliminating a secondary thermostat

8. DEVICE RESET

8.1 Resetting the radio base

10. EXAMPLES OF TYPES OF INSTALLATION

11. PRINCIPAL CHARACTERISTICS

12. INSTALLATION REQUIREMENTS FOR RADIO RELAY ACTUATOR

13. CONFORMITY TO REGULATIONS