After ID assignment
Once the ID has been assigned, the display, when woken up, appears as follows:
Main screen
The P/A key toggles between the context displayed (Operators) and Intercom:
Intercom context
If the P/A key is touched when the internal unit is in standby mode, the unit will wake up in the Intercom
con-
text. By default, it is only possible to call, with the M key, a generic porter switchboard. Using the programming
procedure described below, it is possible to add up to four other intercom calls, which can also be to specic
porter switchboards.
To Next Page
Loading...
