24
EN
Starts the procedure of assigning the order of the button modules.
• Grouping: Single rocker, single axial, double axial button
Lets you choose the type of grouping of the panel.
4.3.3. Addressing
This lets you start the panel and indoor unit addressing procedures.
• Interphones
Starts the indoor unit address assignment procedure.
• Panels
Starts the panel address assignment procedure.
4.3.4. Times
This lets you choose the times for:
• Lock
Lock command duration
• Talk
Maximum talk duration
4.4. Info
This section gives the release information for the devices installed on the panel.
Av fw ver = audio video module version
lcd fw ver = display module version
Kp. fw ver = keypad version
4.5. System
This section lets you restore the factory settings of the various devices or restart the panel.
• Reset Settings: Yes/No
Restores the factory default settings of the display module, after conrmation.
• Reset Panel: Yes/No
Restores the factory default settings of the panel, after conrmation.
• Reboot Panel: Yes/No
Restarts the panel.
• Reboot Installation: Yes/No
Restarts the entire Due Fili installation.
After the reboot, the display shows the screen described in paragraph 5.6.
• External Memory Reset
Conrming the External Memory Reset deletes any names in the contacts list, entry codes and button remap-
ping.
To Next Page
Loading...
Need help?
General
