Vimar ELVOX 41018

23
EN
Label Settings
Level 0 Level 1 Level 2
Display
Language
Italian, English, French, German, Spanish, Greek,
Portuguese, Russian, Swedish, Dutch and Polish
(Default: Italian)
Menu Navigation Navigable/Direct (Default: Navigable)
Font Normal/Large (Default: Normal)
LCD
Brightness 1-5 (Default:5)
Colours B/W, BLUE, GREEN (Default: B/W)
Standby ON/OFF (Default: ON)
Panel
Audio
Speaker 4 levels
Microphone 4 levels
Push-buttons
Setting ID
- Status screen (in progress)
- Status screen (OK/fail)
Module order
- Status screen (in progress)
- Status screen (OK/fail)
Grouping Single, Double, Quadruple
Addressing
Interphones
- Status screen (in progress)
- Status screen (OK/fail)
Panels
- Status screen (in progress)
- Status screen (OK/fail)
Timing
Lock 10 values
Talk 10 values
Info
AV FW Ver xxxxx
LCD FW Ver xxxxx
KP FW Ver xxxx
System
Reset Settings OK/C (Conrm/Delete)
Reset Panel OK/C (Conrm/Delete)
Reboot Panel OK/C (Conrm/Delete)
Reboot Installation OK/C (Conrm/Delete)
External Memory
Reset
OK/C (Conrm/Delete)
The Display section is described in the previous chapter "4.1 Administrator menu".
4.3. Panel
This section lets you set the basic parameters of the audio/video module of the panel. Refer to the specic instruc-
tions of the specic audio/video module for details of the settings.
4.3.1. Audio
This lets you set the operating levels of the loudspeaker and microphone.
• Speaker: 4 levels
• Microphone: 4 levels
4.3.2. Push-buttons
This lets you manage push-button conguration.
• Setting ID
Starts the "call button remapping" procedure.
• Module order