Vimar ELVOX 41018 Installer's Guide

18
EN
3. CONFIGURATION VIA PC
3.1. Programming the Contacts List and entry control codes
The contacts list (up to 8192 items) and the entry control codes (up to 2000 codes) can be programmed via the PC
programming SW (SaveProg), connecting to the audio/video module.
Follow the instructions given on SaveProg.
3.1.1. Standby views
When rst switching on, without having programmed any contacts list, the device looks like this:
Without a keypad With a keypad installed
Press
After programming the contacts list, the standby view looks like this.
Without a keypad With a switchboard
With switchboard and
keypad
Contacts
Press
Porter
Contacts
Extension
Contacts
Porter
3.2. Setting contacts list lters
SaveProg lets you enable a set of lters for targeted access to the subsets of the contacts list.
The available lters are described below.
3.2.1. Initials pre-lter
This lter lets you access a section of the contacts list identied by the names that start with the chosen letter.
Extension
Contacts
Porter
Users Users

Vimar ELVOX 41018 Specifications

General

Brand	Vimar
Model	ELVOX 41018
Category	Intercom System
Language	English