Vimar ELVOX 41018

28
EN
5.5.1. Operation
The keypad has 2 function keys referred to here as and .
Press the
button and the display to go into “Code Entry” mode.
Each time a digit button is pressed, the display will show the digit for a short time and then overwrite it with an aster-
isk.
The entered code is conrmed by following the instructions shown on the display or by pressing
again.
Personal code entry sequence:
+ <code> + .
5.5.2. Display feedback
The device returns the status information associated with the entry control phase:
Access to the
mode for
Entry control Entering code
Waiting for
conrmation
Code
Delete
Confirm
Code
Delete
Confirm
Code
Delete
Confirm
Feedback on actuation, after entering the code:
Done Not completed
Done
Wrong code
Audio feedback of the loudspeaker: Done -> high tone, Not done -> low tone.