VINCI NANO - Page 7

11
12
5A
5B
7
CLOSE LID
OPTION B:
REUSABLE FILTER CUP
OPTION A:
PRE-FILLED K-CUP
6
8
NEEDLE RELIEF POSITION
BREW SELECT / BREW
After placing the K-Cup® in the holder, close
the brewer by securely holding base of the
Carafe(E) and pushing the Control Lid(B)
down.
Insert your prefilled K-Cup into the unit
making sure that the bottom is sitting flat
against the K-Cup holder. Press down gently
to pierce the K-Cup with the brewing needle.
Add 2 tablespoons of your favorite medium
ground coffee into your Reusable Filter Cup(J)
and snap lid to close.
Make sure the Needle Relief lines up with the Needle in the
K-Cup Holder then Insert Reusable Filter Cup(J) into the
K-Cup Holder(G) in the Nano Brewer and close lid.
Rotate the Control Knob(A) to the cup size
icon that matches the cup size icon on the
Carafe(E) as indicated by the water level in
the Carafe(E). Press Optional Bold button
then press Brew Button to start brewing.
Needle
Relief
Needle
“CLICK”
B
REW
NOTE:
If the K-Cup® Holder(G) is not secured properly, the Lid will not close and it will not properly brew.
Refer to step 2 to reposition the K-Cup® Holder(G) .
NOTE:
Refillable Filter Cup will not close
if it is not postioned correctly.
IMPORTANT:
If you force the Lid closed with
the refillable filter cup positioned
incorrectly, you may damage the
unit and it will void the warranty.
OPTIONAL:
USING PREFILLED K-CUP USING REUSABLE FILTER CUP FOR OPTION A AND B