Vingtor Stentofon TKIS-2 Installation Guide

Installing TKIS-2 VoIP Intercom Module
Item Number
Item Name
Description
1008131020
TKIS-2
VoIP Intercom Module
Figure 1: TKIS-2 Overview
Power/Relay Inputs: Programmable relay. Max: 250VAC/220VDC, 2A, 60W
I/O Interface: Interface for control inputs, control outputs and analog audio line out.
External Audio: Connection for microphone and loudspeaker.
Ethernet Port: Ethernet connection with Power over Ethernet.
DIN Mounting Clips: Plastic clips for mounting the device to a DIN rail.
1 Mounting the TKIS-2
The TKIS-2 is normally mounted on a DIN rail. The DIN rail shall be mounted securely to the equipment
rack, and properly stabilized.
Figure 2: TKIS-2 Mounting Clips

Vingtor Stentofon TKIS-2 Specifications

General

Type	Intercom Station
Power Supply	PoE (Power over Ethernet)
Power	PoE Class 2
Ethernet	10/100 Mbps
Audio Frequency Response	200 Hz - 7 kHz
Ingress Protection Rating	IP66
Weight	1.2 kg
Call Button	Yes
Speaker Output	1W
Communication Type	IP
Audio Codecs	G.722, G.711