Need help?Do you have a question about the Vingtor Stentofon TKIS-2 and is the answer not in the manual?
General| Type | Intercom Station |
|---|---|
| Power Supply | PoE (Power over Ethernet) |
| Power | PoE Class 2 |
| Ethernet | 10/100 Mbps |
| Audio Frequency Response | 200 Hz - 7 kHz |
| Ingress Protection Rating | IP66 |
| Weight | 1.2 kg |
| Call Button | Yes |
| Speaker Output | 1W |
| Communication Type | IP |
| Audio Codecs | G.722, G.711 |
Details connectors on Turbine Compact Stations (TCIS, TCIA, TKIS, TMIS).
Details connectors for TFIE, ECPIR-3P, TKIE, TFIX series.
Explains PoE and 24-48 VDC power options for Industrial stations.
Describes the two RJ-45 ports for PoE/LAN Ethernet on Industrial stations.
Details the 6 I/O connection options for Industrial stations.
Shows connectors on Turbine Ex stations and external connections.
Instructions to log into the station's web interface.
Steps to connect other IP intercom stations to the network.
Setting up the directory for auto-discovered stations on the network.
Checking the registration status of devices in the Edge Controller system.
Registering third-party SIP devices like phones and speakers to the IC-EDGE system.
Configuring SIP phone accounts to register with the Edge Controller.
Steps to verify the registration status of SIP devices.
Configuring ringlist sequences, intervals, and loopback options.
Accessing the station's web interface for SIP configuration.
Configuring station mode, IP parameters, and model for SIP.
Configuring SIP account details, registration, and call settings.
Configuring Direct Access Keys and Ring Lists for SIP stations.
Step-by-step guide for upgrading software using the station's web interface.
Steps to reset stations to factory defaults using DHCP.
Steps to reset stations to factory defaults using a static IP.
To Next Page
