Vingtor Stentofon TKIS-2 - Time Settings; Audio Messages

61
Turbine Station Conguration Guide
A100K11194
Group Call (IC-Edge mode only)
Operate the relay when the station receives a Group Call
Idle
Select the state the relay should change to when nothing else is occuring on the station.
Error (Not Registered)
Select the state the relay should change to when the station is o󰀨-line.
7.7 Time Settings
● Select SIPConguration > Time
Time Settings
You can enable NTP (Network Time Protocol), select the time zone and enter the date and time
manually.
7.8 Audio Messages
Prerecorded audio messages can be uploaded to a Turbine which can be triggered by various events
occurring on the station. The audio message playback can be triggered by 3 main events: DTMF,
Call, Relay.
● Select SIPConguration > Audio Messages