Vingtor Stentofon TKIS-2 - Audio Settings

58
A100K11194
Turbine Station Conguration Guide
RTP Encryption
Possible conguration options: disabled, srtp_encryption
SRTP Crypto Type
Possible conguration options: AES_CM_128_HMAC_SHA1_80 / AES_CM_128_HMAC_SHA1_32
Use Unencrypted SRTCP
Check the box to enable unecrypted SRTCP
TLS Private Key
Possible conguration options: turbine_server_sha256.key / turbine_server_sha1.key
Call Settings
Enable Auto Answer
- If enabled, the station will answer automatically, and if not, the station will ring.
● After entering the desired values, click SAVE followed by REBOOT to enable the SIP settings.
7.4 Audio Settings
● Select SIPConguration > Audio
Speaker Volume
● Set speaker volume between 0 and 5
Volume Override Level
● Select the volume override level in the range 0 to 8 from the drop-down menu
Automatic Gain Control (AGC)
● If speech level and environmental noise are very unstable, it may be enabled
Automatic Volume Control (AVC)
● When enabled volume control is adjusted according to the noise level. Disabled by default.
Active Noise Cancellation (ANC)
● When enabled, most of the background noise will be ltered out of the microphone signal.
Enabled by default.
● After entering all the desired values, click SAVE