Vingtor Stentofon TKIS-2 - Network Access Control

67
Turbine Station Conguration Guide
A100K11194
Dak Released
- If enabled, the station will send an SNMP trap when a DAK is released.
Relay Activated
- If enabled, the station will send an SNMP trap when a relay is activated.
Relay Deactivated
- If enabled, the station will send an SNMP trap when a relay is deactivated.
Button Hanging
- If enabled, the station will send an SNMP trap when a button is hanging.
Sound Test Failed
- If enabled, the station will send an SNMP trap when a sound test has failed.
Sound Test Error
- If enabled, the station will send an SNMP trap when there is a sound test error.
Sound Test Success
- If enabled, the station will send an SNMP trap when a sound test is successful.
Input Button Pressed
- If enabled, the station will send an SNMP trap when an input is activated.
Input Button Released
- If enabled, the station will send an SNMP trap when an input is deactivated.
Software Fault
- If enabled, the station will send an SNMP trap when software daemon has stopped working.
8.2 Network Access Control
IEEE 802.1X is an IEEE Standard for Port-based Network Access Control (PNAC). It provides an
authentication mechanism to devices wishing to attach to a LAN, either establishing a point-to-point
connection or preventing it if authentication fails.
802.1X Network Access Control is congured from the IP station web interface.
● Select Advanced Network > 802.1X
The radio-button list lets the user choose the authentication method to congure.