What to do if the Vingtor Marine Equipment system has shut down?
If the entire Vingtor Marine Equipment system has shut down and there's no light indication on the ETB panel, first check the voltage on terminal block K11 no.1-2. If there's no voltage, inspect the 24V DC mains power supply or the SPS-4 power supply. If the voltage measures correctly between 24-32VDC, check the S1 2AT and S2 1AT fuses.
How to troubleshoot SPS-4 power supply failure in Vingtor Marine Equipment?
To troubleshoot an SPS-4 power supply failure in Vingtor Marine Equipment, start by checking the main power supply to ensure 230V AC or 115V AC hasn't failed, switching the system to 24V DC emergency power. Also, check the 5.0AT fuse on terminal 3. If the problem persists, the power supply module may need repair or replacement.
General| Network | GSM 900 |
|---|---|
| Battery | Li-Ion |
| Internal Memory | No |
| Expandable Memory | No |
| Camera | No |
| Bluetooth | No |
| USB | No |
| Colors | Black |
To Next Page
