Need help?Do you have a question about the Vintec V50DG 2e and is the answer not in the manual?
General| Type | Freestanding |
|---|---|
| Capacity | 50 bottles |
| Temperature Zones | Dual Zone |
| Weight | 50 kg |
| Installation | Freestanding |
| Door Type | Glass Door |
| Number of Zones | 2 |
| Door Material | Tempered Glass |
| Reversible Door | Yes |
| Lock | Yes |
| Shelves | 6 |
Appliance intended for general use; supervision needed for users with reduced capabilities. Not for children's play.
Select a well-ventilated, stable location away from heat sources and dampness.
Allow 24 hours before operation; leave door open for odor clearance.
Notes on free-standing/built-in models and optimal ambient temperature range of 5°C to 35°C.
Grounding reduces electric shock risk; use provided cord and grounded outlet.
Remove packaging, position for access, and level unit using adjustable feet.
Attach back spacer for proper ventilation and heat evacuation.
Plug in and press power; expect initial temperature variance; stabilization takes hours.
Wait 3-5 minutes after power interruption before restarting to prevent damage.
Explains normal noises like gurgling, popping, and fan sounds from compressor operation.
Load bottles in rows, distribute weight, adjust shelves for bottle size, maintain wall gaps.
Avoid overloading, stacking >1.5 rows, obstructing fans, pulling multiple shelves, or covering shelves.
For maturing/storage, constant 12°C; can be set for serving temps 7°C-18°C.
2-in-1 cellars with independent regulation from 5°C to 18°C for each zone.
Upper chamber for whites (5-10°C), lower for reds (room temp or 12°C).
Factory presets exist. Wait ~12 hours for temperature adjustment due to wine mass.
Controls for MAX (5-9°C), NORMAL (10-14°C), MIN (15-18°C), and OFF.
Use a knob to adjust temperature; clockwise lowers, counter-clockwise raises.
Use UP/DOWN buttons to adjust temperature in 1°C increments for specific electronic models.
Press buttons to temporarily display set temperature on LCD for SG"2e" models.
Chart provides recommended serving temperatures for various wine types for best enjoyment.
Cellar maintains 12-14°C for storage; serving temps vary by wine type for appreciation.
Discusses wine aging potential and peak maturity, advising consultation with wine merchants.
Automatic defrost system recycles condensation for humidity, crucial for cork seals.
Air circulates via fans and hollow shelves; unit is not fully sealed for fresh air admission.
Pull shelves out 1/3 for access; tilt to remove/install safely.
Get assistance for door reversal as it is heavy and can cause injury if dropped.
Instructions provided for rotating or changing the door for a right opening.
Step-by-step guide to remove and re-install the door, including hinge and leg adjustments.
Steps to remove door axis, door, and top hinge; then fix left hinges and re-install door.
Instructions for removing/fixing hinges and re-installing the door using axis cores.
Steps to remove door axis, hinges, and re-install the door using bolts and door axes.
V30 models are strictly free-standing; built-in installation voids warranty.
Specifies minimum cut-out, side/top/rear clearances, and front venting requirements.
Provides front, side, and top views with dimensions for 30mm and 85mm plinth recesses.
Details height, width, and depth for V50 models; not designed for full integration.
Specifies minimum cut-out, side/top/rear clearances, and front venting requirements.
Notes power switch location, voltage/amp requirements, cord length, and surge protector advice.
Basic checks for power, door closure; contact service for malfunctions; non-technician intervention voids warranty.
Power loss resets settings. Avoid opening door during outages to maintain temperature.
Guide to identify and resolve issues like unit not operating, not cold, vibrations, or door closure problems.
Table detailing capacity, gas load, temperature settings, power, dimensions, and weight for R134a models.
Lists features like compressor type, voltage options, auto-defrost, humidity control, internal light, adjustable feet, and double glazed door.
Details capacity, gas load, temperature, power, dimensions, and weight for R600a models.
Lists features like compressor type, voltage, auto-defrost, humidity, light, feet, and door type for R600a models.
Recommendations for safe use, handling, and potential hazards associated with R600a refrigerant.
Guidelines for safe appliance disposal, emphasizing recycling and avoiding landfill due to flammable components.
To Next Page
