Need help?Do you have a question about the Vintec V40SG 2e and is the answer not in the manual?
General| Capacity | 40 bottles |
|---|---|
| Installation | Freestanding |
| Lock | Yes |
| Reversible Door | No |
| Refrigerant | R600a |
| Door Type | Single glass door |
Appliance intended for use by persons with reduced capabilities, requiring supervision.
Guidelines for selecting a suitable location, considering ventilation, heat, dampness, floor, and power supply.
Details on freestanding vs. built-in models and optimal ambient temperature range for operation.
Essential instructions for proper grounding, surge protection, and cord safety.
Guidance on leveling the wine cellar using adjustable feet for stability.
Instructions for attaching the back spacer to ensure proper ventilation.
Warning: Failure to attach the back spacer voids the warranty.
Guidance on waiting 3-5 minutes before restarting the unit after power interruption.
Explanation of normal sounds produced by the wine cellar during operation.
Recommendations for loading bottles to ensure proper air circulation and prevent tilting.
Details on single-zone wine cellars for maturing or serving, with temperature recommendations.
Information on 2-in-1 and dual-zone cellars with independently regulated compartments.
Chart detailing factory preset temperature ranges for various Vintec models.
Explanation of the knob-based temperature adjustment for standard models.
Explanation of the control panel and temperature adjustment for V30SGe models.
Guide to operating controls for V40/V50 e and 2e series, including dual compartment models.
How to view the set temperature on SG"2e" model displays.
Chart providing ideal serving temperatures for various types of wine.
Explanation on why consistent temperature is crucial for wine storage and aging.
Explanation of defrost, condensation management, humidity, and ventilation features.
Instructions on how to adjust or remove shelves for better access and capacity.
Specific diagrams and instructions for reversing the door on V30 models.
Labels and descriptions for parts involved in the V30 door reversal process.
Identification of parts (lock screws, hinges, door axis) for V40 door reversal.
Detailed steps for removing and installing hinges and door for V40 models.
Detailed steps for removing and installing hinges and door for V50 models.
Specific installation requirements for V40 models in an 85mm recess, including dimensions and clearances.
Specifications for installing V50 models in built-in scenarios, including cabinet dimensions.
Guidance on what to do during power outages to protect wine and maintain settings.
Table listing common wine cellar problems and their potential causes for self-diagnosis.
Comparative technical specifications across different Vintec models using R134a refrigerant.
Summary of common features across Vintec wine cellar models.
Comparison of technical specifications and standard features for R600a models.
Recommendations for safe operation, ventilation, servicing, and environmentally responsible disposal.
To Next Page
