Vintech Technology Clock C100 - Safety Instructions

CLOCK C100 – Vacuum tube clock VFD
_____________________________________________________________________________________
User Manual - EN 3
1. Safety instructions
Read the instructions: All instructions should be read
carefully before the clock is turned on.
Caution: All warnings on the device and in the operating
instructions must be observed.
 Vacuum tubes are very fragile, handle the clock
carefully to avoid breaking a vacuum tube.
 If one of the vacuum tubes is damaged, immediately
turn off the clock by unplugging the power supply from
the main.
 Moisture and water: The clock should be used and/or
kept in a dry place, protected from moisture and dust.
 Temperature: The clock must be used and/or kept in a
room at room temperature between 0 and 40°C (32°F
to 104°F). The clock must not be exposed in direct
sunlight.
 Object and liquid: The clock must not come in contact
with a liquid. No object should enter the clock. Switch
off the clock immediately if one of the two cases arises.
 Do not use the clock for anything other than the
intended use as described in the manual.
 If the clock does not work properly (for example, no
more display), turn off the clock immediately and
contact customer service.
 This clock is not a toy, keep this clock out of the reach
of children.
 This clock should only be operated by people who have
read and understood the user manual.
 The clock has a double electrical isolation, do not
connect the power supply or the clock to the ground.
2. Packaging
Carton content:
1x Clock VFD C100
1x Power supply 12V
1x USB stick containing the instructions for use
Special care was taken on the packaging to protect
the clock tubes from shocks. Check in particular if
the tubes are in good condition: No breakage or
crack. If the dome at the top of one of the tubes is
light in color (bleached), then it is damaged. In this
case, contact customer service.
Check if the power supply does not appear to be
physically damaged (for example, the twisted mains
connector, broken wire). If the power supply
appears to be damaged, do not connect the unit and
contact customer service.
3. Technical characteristics
Visual aspect :
 Types of tube : 6 VFD tube + 2 separators
 Aluminum, wood and glass materials mainly
 Large bright tubes of 20x25mm
 More than 2000 backlight colors
 Adjustable light output
 Economic mode possible
Functions :
 Model: C100
 Time, date and alarm management
 12-24H Mode
 Date DDMMYY or MMDDYY
 Audible, visual or both alarms
 Parameter settings by 4 buttons
 Clock counter by a RTC
 Automatic backup of the configuration
 Save the time, the date for 12 hours after a
power failure.
Supply :
 Consumption: 2W to 6W
 Power supply voltage: 110 to 240V
 Mains frequency: 50-60Hz
 European standard socket (Other connector on
request)
 Weight of the clock: 300g
 Size of the clock: 210x55x90mm