18
Contents
Previous
Page
First
Page
Next
Page
Previous
View
Section 3
Tools and Materials
General
1 The following tools and consumable materials will be required for servicing, disassembly, repair,
assembly and adjustment.
Tools
Consumable materials
Item Part No. Use
Extended 3 mm/4 mm AF
spherical-ended hex wrench
3354-931TL Removing tilt drag
mechanism and support caps
Pan bearing nut key 3448-902TL Adjusting pan bearing nut
Item Part No. Use
Loctite 222E Z002-075 Thread locking
Loctite 270 Z002-034 Spring assembly
Loctite 290 Z002-012 Friction shoe pivots
Loctite 380 Z002-078 Adhesive
Loctite 415 Z002-062 Adhesive
Loctite 601 Z002-020 Lift-off stop pin
Loctite 638 Z002-058 Adhesive
Loctite 641 Z002-074 Bearing installation
Grease, Chesterton Z150-105 Support cap lubrication
Grease, Castrol LM Z150-122 General lubrication
Grease, Easyrun 50 Z150-081 Balance adjuster and balance mechanism bearings
and shims
Loctite 406 Z002-086 Adhesive
Permabond ESP110 Z002-073 Adhesive
To Next Page
Loading...
