Do you have a question about the Vinten Vector 75 V4095-0001 and is the answer not in the manual?
Brand | Vinten |
---|---|
Model | Vector 75 V4095-0001 |
Category | Camera Accessories |
Language | English |
Explains the meaning of warning symbols used in the manual for user safety.
Defines the intended application and operational limits of the Vector 75 head.
Provides guidance on the proper disposal of batteries to protect the environment.
Details the knob-based system for adjusting the head's balance and C of G.
Explains the friction systems for smooth pan/tilt movement and their control knobs.
Describes the friction brakes for locking head positions and the centre lock function.
Describes the battery-powered LED illumination for the level bubble.
Covers mounting points, clamps, and options for pan bars.
Details the attachment of cameras via a wedge adaptor.
Step-by-step guide for unpacking the head and its accessories.
Essential steps for securely mounting the head onto a tripod or pedestal.
Instructions for fitting and adjusting the pan bars for operational use.
Detailed procedure for attaching a camera and payload to the head.
Explains how to balance the camera payload for smooth movements.
How to engage and disengage the centre lock for securing the platform.
Details the application, release, and cautions for pan and tilt brakes.
How to adjust the resistance for pan and tilt movements.
General advice on the head's robustness and minimal maintenance needs.
Guidelines for cleaning the head, specifying materials to avoid.
Steps for cleaning balance mechanism tracks, requiring partial dismantling.
Specific instructions for cleaning the vertical tracks of the balance mechanism.
Instructions for cleaning horizontal tracks without head disassembly.
Minimal routine checks, including battery and slide clamp.
Step-by-step guide for replacing the illumination unit battery.
How to adjust the clamp for proper control over slide plate movement.
Instructions for moving the wedge adaptor for optimal camera balance.
Guides on adjusting the engagement point of the pan and tilt brakes.