Vinten Vector 700 - Page 26

26
Contents
Previous
Page
First
Page
Next
Page
Previous
View
16 To reposition the wedge adaptor (Fig 4.5):
16.1 Engage the centre lock (3) and remove the load.
16.2 Hold the body of the wedge adaptor (4) and use a 4 mm hexagon wrench to remove four
securing screws (1).
16.3 Reposition the wedge adaptor on the sliding plate (2), ensuring that the narrow end of the wedge
adaptor faces forwards
16.4 Insert the four screws (1) in the holes in the wedge adaptor and tighten.