Vinten Vector 700 - Page 63

63
Contents
Previous
Page
First
Page
Next
Page
Previous
View
30 3448-249 Serrated boss - pan drag knob 1
31 M600-309 Washer, plain, large, M5 1
32 M006-737 Screw, low-profile, cap head, socket, M5 x 6 mm long 1
33 3354-292 Knob sleeve boss 1
34 3448-248* Drag knob - pan 1
35 3448-235 Drag knob shaft - pan 1
36 3448-252 Drag detent ring - pan 1
37 M801-058 Pin, dowel, 2.5 mm dia. x 16 mm long 1
38 P900-008 Ball, steel, 4 mm dia. 2
39 J532-067 Spring, compression, 25 mm free length, 3.50 mm OD x 2.71 mm ID,
1.123 N/mm rate
2
40 3354-305 Location disk 1
41 M600-106 Washer, plain, light, M8 1
42 M701-005 Circlip, external, standard, 8 mm shaft dia. x 0.80 mm thick 1
43 L801-108 Pin, dowel, 3/32 in. dia. x 3/8 in. long 1
44 3448-260 Bevel and drive gear combination 1
45 3448-222 Shim - bevel gear 1
46 M801-025 Pin, dowel, extractable, 6 mm dia. x 20 mm long 2
47 3448-234 Nut - pan bearing 1
Fig 6.4 Vector 700/700H (Black) Pan and Tilt Head
- Pan Drag/Brake Mechanism (Cont)
Item Part No Nomenclature Qty