Vinten Vector 700 - Page 80

80
Contents
Previous
Page
First
Page
Next
Page
Previous
View
Fig 6.10 Vector 700/700H (Black) Pan and Tilt Head - Platform Assembly
Item Part No Nomenclature Qty
1 3354-242 Standard platform slide 1
2 M006-921* Screw, countersunk head, socket, M5 x 10 mm long 6
3 M806-004* Pin, coiled-spring, 4 mm dia. x 10 mm long, hdp 8
4 3354-261* Serrated disc (Mk7 type) 2
5 3458-255* Label 1
6 3354-52 Adjustment shaft assembly 1
7 M006-737 Screw, low-profile, cap head, socket, M5 x 6 mm long 2
8 3423-63 Serial number label (Vector 700) 1
9 3458-425* Front stop bung (Vector 700H only) 1
10 3458-266* Platform buffer 1
11 3354-278* PTFE Strip 1
12 3354-238 Platform adjuster pinion 1
13 3354-243 Bearing bracket 1
14 M005-733 Screw, cap head, socket, M4 x 8 mm long 2
15 3354-239* Platform adjuster knob 1
16 M004-103 Screw, countersunk head, pozidrive, M3 x 8 mm long 1
17 3354-240 Shaft support 1
18 M004-703 Screw, cap head, socket, M3 x 8 mm long 2
19 3354-448* Slide clamp block 1
20 3458-36 Brake disc (tilt assembly) 1
21 3458-263 Tilt brake centre 1
22 M006-923 Screw, countersunk head, socket, M5 x 16 mm long 2
23 M005-706 Screw, cap head, socket, M4 x 16 mm long 1
24 3354-235 Slide clamp lever 1
25 3458-234* Cover, slide clamp lever 1
26 3354-233 Slide clamp screw 1
27 L850-036* Threaded-insert, wire thread insert (helicoil), 3/8 in. BSF x 1-1/2
Diameters long
2
28 3458-230*Platform 1
29 3354-236 Rack strip 1
30 M806-031 Pin, coiled-spring, 4 mm dia. x 8 mm long, mdp 3