22
Contents
Previous
Page
First
Page
Next
Page
Previous
View
7 The procedure for resetting the pan and tilt brake knobs is as follows:
7.1 Apply the brakes.
7.2 Referring to Fig 6.2, remove the grubscrew (54) and pull the knob (53) off the shaft. Ensure knob
retainer (53A) remains on shaft.
7.3 Turn the shaft so that the brake is fully applied and refit knob (53) in the vertical position. Secure
with grubscrew (54), ensure grubscrew seats correctly in knob retainer (53A).
To Next Page
Loading...
