37
Contents
Previous
Page
First
Page
Next
Page
Previous
View
43.3 Ensure square end of drag actuator shaft (230) engages correctly with aperture of pan drag lever
(76) within primary mechanism assembly (2). If difficulty is experienced reposition drag lever by
adjustment of pan drag knob (49).
43.4 Secure pan drag unit assembly (3) with six M5 screws (4) and (5) removed at Para 35.3 ensuring
two shorter screws (5) are refitted in their correct positions.
43.5 Position brake flange assembly (9) and secure with two M4 button head screws (10) removed at
Para 35.2.
Loading bars
Remove
44 The LH or RH loading bar assembly is removed as follows (Fig 6.3):
44.1 Comply with Para 6.
44.2 Remove external circlip (121).
44.3 Remove washer-actuator bearing (120).
44.4 Remove loading bar assembly (119) or (130) and second washer-actuator bearing (120).
To Next Page
Loading...
