Vinten Vision 30 - Page 54

54
Contents
Previous
Page
First
Page
Next
Page
Previous
View
26 J532-037 Spring, compression Flexo 102908 2
27 3259-231 Plug, spring 2
28 J532-084 Spring, compression Terry Barnes 53700 1
29 3259-12 Assembly, end plate/adjustment thread, secured by: 1 Fig 6.7
30 M007-524 Screw, skt butt hd M6 x 25 mm lg 6
31 M007-520 Screw, skt butt hd M6 x 16 mm lg 1
32 3259-250 Cover, front - crosstie, secured by: 1
33 M005-706 Screw, skt cap hd M4 x 16 mm l 4
34 1423-2 Nameplate (medium), secured by: 1
35 (NI) Z001-046 Tape, adhesive Scotch Y909 A/R
36 L102-001 Screw, hammerdrive, 00 x 1/8 in. 2
37 3259-251 Cover, top - crosstie, secured by: 1
33 M005-706 Screw, skt cap hd M4 x 16 mm l 4
38 3259-13 Assembly, platform, secured by: 1 Fig 6.8
31 M007-520 Screw, skt butt hd M6 x 16 mm lg 4
39 M007-705 Screw, skt cap hd M6 x 20 mm lg 3
40 3259-314 Cover, side, secured by: 1
41 M005-718 Screw, skt cap hd M4 x 12 mm lg 4
42 M005-704 Screw, skt cap hd M4 x 10 mm lg 4
43 P602-028 Washer, thrust INA LS1730 1
44 P602-026 Bearing, needle thrust INA AXK1730 1
45 P602-027 Washer, thrust INA AS1730 1
46 3259-274 Centre, drag knob 1
47 3259-275 Retainer, drag knob, secured by: 1
48 M003-102 Screw, csk hd M2.5 x 6 mm lg 2
49 3199-244 Knob, drag, secured by: 1
50 M005-101 Screw, csk hd M4 x 6 mm lg 3
51 3199-299 Label, tilt drag
49 3199-244 Knob, drag, secured by: 1
50 M005-101 Screw, csk hd M4 x 6 mm lg 3
Fig 6.2 Secondary Mechanism Assembly (Cont)
Item
No. Part No. Nomenclature Qty