Need help?Do you have a question about the Viofo MT1 and is the answer not in the manual?
Make sure metal contacts face VIOFO logo side. Push until click.
Ensure camera is off. Push edge with fingernail to remove.
Instructions for physically attaching the main unit, GPS, remote control, and cameras.
Steps for connecting camera cables and power cables to the main unit.
Automatic recording that overwrites oldest files when storage is full.
Short press REC to save current and last file, extended by 20s.
G-sensor activated footage is locked to prevent overwriting.
Table detailing device status (e.g., power on, recording) and corresponding LED lights.
Instructions for downloading the VIOFO app from app stores or official website.
Steps to enable Wi-Fi and connect the smartphone to the dashcam.
Methods to view recorded videos on a computer or via the VIOFO app on a phone.
Setting video resolution, WDR, exposure, and time-lapse recording.
Configuring loop recording, motion detection, and G-sensor sensitivity.
Enabling GPS logger, setting speed unit, and GPS info stamp.
Setting date/time, time zone, and enabling date/camera model stamps.
Adjusting frequency, image rotation, and formatting the microSD card.
Default settings, car number, custom text stamp, and firmware version check.
Instructions and notes for upgrading the device firmware via microSD card.
Information on FCC rules, compliance, and manufacturer cautions.
Contact information for warranty, technical support, and company details.
General| Brand | Viofo |
|---|---|
| Model | MT1 |
| Category | Dash Cameras |
| Language | English |
To Next Page
