Need help?Do you have a question about the Viofo A119 V3 and is the answer not in the manual?
Lists various accessories included or available for the dashcam.
Details the steps for mounting the camera and connecting the power.
Provides recommendations for using Motion Detection and G-sensor settings.
Identifies and explains the camera's buttons and ports with labels.
Describes the behavior of the LED indicator based on its color.
Explains the function of buttons in different modes and displays status icons.
Instructions on how to power on the dashcam by inserting SD card and connecting power.
Details automatic and manual methods for turning the dashcam off and on.
Explains how loop recording works, file saving, and overwriting.
Describes automatic and manual emergency recording triggered by G-sensor or button press.
Explains how motion detection initiates recording when movement is detected.
Instructions on how to access and play recorded videos using the device buttons.
How to connect the camera to a computer and access files in mass storage mode.
How to mute the device's audio recording during operation.
Steps for downloading, preparing, and installing firmware updates for the dashcam.
Lists available video resolution options for recording.
Explains how bitrate affects video quality, smoothness, and recording time.
Options for video file formats (.MP4, .TS) and recommendation.
How to adjust EV (Exposure Value) for better recording in different lighting.
Explains WDR's function in balancing bright and dark image areas for better exposure.
Describes the three parking mode options: Auto event detection, Time lapse, Low bitrate.
How the G-sensor detects movement to trigger event recording in parking mode.
Adjusts motion detection sensitivity to avoid false triggers in parking mode.
Explains time-lapse recording for conserving memory and reviewing footage.
How to enable/disable GPS tracking and its impact on speed/position data.
Sets the unit for displaying speed (KPH or MPH).
Explains G-sensor sensitivity settings for locking files during impact.
Imprints the date and time on recorded videos.
Imprints GPS information onto recorded videos.
Imprints the camera model name onto recorded videos.
Turns the camera's microphone ON or OFF.
Turns the screen OFF after a specified idle time.
Configures a delay before the camera starts up after power is applied.
Allows manual setting of the system date and time.
Sets the current time zone for accurate GPS time and date calibration.
Selects the display language for the camera's menu and interface.
Toggles notification sounds ON or OFF.
Adjusts frequency to reduce video flickering and banding.
Rotates the camera's display image by 180 degrees.
Deletes all data from the Micro SD card.
Sets the frequency of warnings before formatting the SD card.
Restores the camera's settings to factory defaults.
Imprints a customized 11-digit number (like license plate) on the video.
Imprints custom text onto the recorded video.
Checks the currently installed firmware version of the device.
General| Field of View | 140° |
|---|---|
| Screen Size | 2.0 inches |
| Wi-Fi | No |
| Loop Recording | Yes |
| G-Sensor | Yes |
| Lens | 7-element glass lens |
| Sensor | Sony STARVIS IMX335 |
| GPS | Yes (optional) |
| Storage | microSD up to 256GB |
| Power Supply | 5V/1A via mini USB |
| Operating Temperature | -10°C to 65°C |
| Parking Mode | Yes, supported |
| Dimensions | 84mm x 55mm x 40mm |
| Resolution | 2560 x 1600 (Quad HD+) |
To Next Page
