3.Automatic cleaning
The machine is in the automatic cleaning state, and the automatic cleaning LED lights up.
State change:
1.Press the automatic or spot button on the machine, the buzzer will soundand enter the
standby mode.
2. Press the spot button, buzzer sounds 3 times, and enters the automatic spotcleaning
mode.
3. The fault is detected, the error mode is entered, and the machine alarms.4. When the
13
charger is plugged in, the buzzer will sound and enter the chargingmode.
4.Spot cleaning
In spot cleaning, LED light will be on .
Spot cleaning mode is suitable for cleaning a small dirty area at home.
The machine cleans this area in a bow shape,stops after the cleaning, andenters the automatic
recharging mode.
State change:
1.Press the automatic or spot buttons on the machine, with the buzzersounds, it enters the
standby mode.
2When the battery power is low, buzzer will sound 3 times, then the machine willenter automatic
recharge mode.
3. If it detects the fault, it will enter the wrong mode and the machine will alarm.
Auto cleaning route
To Next Page
