19
ENG
• Ask for patient feedback during treatment. The patient should feel a tingly
sensation that is not overbearing.
• Treatment intensity settings may be moved up or down anytime during
treatment.
Facial Treatment
1. On the main menu display, select "Face".
2. Select treatment intensity level using the treatment intensity dial.
3. Open one ampoule of treatment solution and pour it into a small bowl. Apply the
solution to the treatment area
4. Press the 'Start' button to begin treatment.
5. Remove the face hand piece from the cradle and gently apply circular motions
working from the center of the face outwards (See illustrations A,B, and C).
6. Slowly increase power intensity according to the patient’s comfort level.
7. When treating the periorbital area, temporarily lower the intensity and continue
gentle circular motions, again gradually increasing the treatment intensity as patient
comfort indicates.
8. Clean and dry the hand piece before returning it to its holder (refer to Section 6.1.
Cleaning the Device).
9. When treating the neck area, use circular motions, working from the front center of
the neck outwards.
5.4
• Be cautious when using treatment intensity higher than 70% when treating
the face.
• Be cautious when using treatment intensity higher than 80% when treating
the body.
Caution
• The treatment intensity should be set according to the patient’s comfort level
and may be adjusted up or down anytime during treatment.
• Reduce the treatment intensity whenever working on the chin, neck or upper
lip areas, as they are generally more sensitive.
Note
This system does not automatically stop treatment and it is the operator's
sole responsibility to stop treatment.
Caution
To Next Page
Loading...