7
Section 5: Mount Installation
This monitor ONLY includes screws which may be used when attaching the monitor to
a mount. No mount or mounting accessory is included.
1. Open the package, take out the product with foam still attached, and gently place it on a
desktop or table. Remove the extra parts and the foam covering the monitor. If the monitor
was already attached to the stand, remove the stand.
2. Follow the directions received with your mount, stand, or accessory and install the monitor
on the wall or xture as desired. Remember to use the included NO. 2 screws when
attaching anything to the back of the monitor.
NO. 2 Screws x 4
Use the NO. 2 screws provided for secure installation.
Mount
(Not included)
To Next Page
Loading...
Need help?
General
