Viotek NV32Q User Manual

8
Section 5: Mount Installation
1. Open the package and take out the product with foam still attached. Gently
place it on a desktop or table. Remove the extra parts and the foam covering the
monitor. If the monitor is already attached to the stand, remove the stand.
Button
2. Press the button to remove the adapter on back of monitor, then tighten the
included four NO. 2 screws onto the mounting holes on back of monitor.
NO. 2
Screws x 4
3. Install the monitor on the wall, mount, or xture as desired.
Mount
(not included)

Viotek NV32Q Specifications

General

Color	black
Screen Type	led
Tiltable	yes
Wall Mount	75mm x 75mm
Webcam	no
OS Compatibility	windows, mac
Screen Size	32 inches
Panel Type	va
Aspect Ratio	16:9
Resolution	3840 x 2160
Refresh Rate	60hz
Horizontal Viewing Angle	178 degrees
Vertical Viewing Angle	178 degrees
Response Time	8 milliseconds
Brightness	300 candela per square meter
Contrast Ratio	1, 000, 000:1
Synchronization	freesync (amd adaptive sync), g-sync compatible (nvidia adaptive sync)
HDR	yes
Built-In Speakers	no
HDMI Ports	3
Display Port Inputs	1
Depth with Stand	8.9 inches
Height with Stand	19.9 inches
Width with Stand	28.1 inches
Net Weight without Stand	15.5 pounds